DO NOT MIX MY SOLE DYE WITH ANY OTHER SAUCE! THIS DYE IS READY TO USE STRAIGHT OUT OF THE BOTTLE. SHAKE THE BOTTLE WHEN YOU RECIEVE, USE A CLEAN BRUSH, APPLY LIGHT COATS AND LET DRY. IT REALLY IS THAT SIMPLE.
DISCLAIMER: WE ARE NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR SHOES FOR FAILURE TO PROPERLY FOLLOW THE INSTRUCTIONS. IF YOU ARE INEXPERIENCED YOU SHOULD CONSIDER SENDING THEM IN TO HAVE THEM PROFESSIONALLY DYED.
You are purchasing a bottle of permanent sole dye w/ glass dropper to make for easy mixing. This sole dye is very powerful so ensure you allow each coat to fully dry before adding another coat. This is the most VIBRANT sole dye on the market. For best results let all dye dry naturally over 24 hours. Apply with a paintbrush!
THIS DYE IS FOR ICY TRANSLUCENT/GUM SOLES ONLY!!! NOT FOR HARD RUBBER BOTTOMS ON AIR FORCE 1S OR RETRO 1S! IF USED ON HARD BOTTOMS IT WILL ONLY ACT AS A STAIN AND NOT AN OPAQUE DYE!
INSTRUCTIONS TO USE!!!!
1) SHAKE BOTTLE WELL BEFORE USING!!!
2) CLEAN BOTTOMS BEFORE APPLYING SOLE DYE. USE A PAINT BRUSH TO EVENLY APPLY THE DYE. ALLOW EACH COAT TO FULLY DRY BEFORE ADDING ANOTHER! DO NOT HOLD THE BRUSH IN ONE AREA, THE KEY TO HAVING EVEN COATS IS TO KEEP THE BRUSH MOVING.
3) I RECOMMEND LETTING DRY NATURALLY BUT SOME PEOPLE USE A HAIR DRYER, DO WHAT WORKS FOR YOU.
4) MAKE SURE DYE IS FULLY DRY BEFORE WALKING ON CARPET (ITS DYE IT WILL STAIN!!!!)
My sole dye is STRONG it is highly recommended to purchase the diluter when you purchase it in the event you need it lighter!
RESULTS VARY BASED ON OXIDATION OF THE SOLE. THE EXAMPLE SOLES HAVE ZERO OXIDATION AND SHOW THE DYE ON ICY SOLES. YELLOW SOLES WILL BE DARKER UNLESS YOU DEOXIDIZE COMPLETELY BEFORE DYEING.
This sole dye is designed for translucent/icy/gum soles (yeezy 350, retro 11, retro 6, boost material). This dye is NOT designed for hard rubber such as Air Force 1 soles or Retro 1 bottoms. This dye can be used a variety of ways but it is designed specifically for translucent/icy soles.