This flex adhesion promoter goes in your paint to create maximum flexibility. Must heat set! 4 oz bottle (You can apply by airbrush or paint brush)
Instructions: SHAKE WELL
HIT EM WIT DA FLEX INSTRUCTIONS!!!!!
WHATS UP?! GLAD YOU DECIDED TO HIT EM WIT DA FLEX ! OK THE INSTRUCTIONS ARE SUPER SIMPLE SO LETS GET STARTED. THERE ARE MULTIPLE WAYS TO USE THIS ADDITIVE. NOTE: THIS IS AN ADDITIVE NOT A SUBSTITUTE. YOU STILL HAVE TO DO PROPER PREP FOR THIS TO WORK!
1ST METHOD: USE AS A STANDALONE. SPRAY DIRECTLY THROUGH YOUR AIRBRUSH AFTER YOU PREP THE SHOE. AFTER THE FIRST COAT HEAT SET WITH HAIRDRYER OR HEATGUN. YOU STILL NEED TO COVER WITH A FINAL COAT OF PAINT TO GET RID OF THE TACKINESS OR JUST USE THE SECOND METHOD
2ND METHOD: MIX WITH PAINT AT A 1:4 RATIO AND HEAT SET AFTER EVERY COAT.
FOR USE ON MIDSOLES OF HUARACHES, PRESTOS OR ANY OTHER SOFT MIDSOLE: USE THE FIRST METHOD AND THEN APPLY PAINT IN BETWEEN COATS. THE MORE FLEX THE MORE PRESSURE THE MIDSOLES CAN WITHSTAND. PREP THE MIDSOLES WITH ACETONE AND HIT WITH FLEX, THEN HIT WITH YOUR PAINT, HIT WITH FLEX AND HIT WITH YOUR PAINT. REPEAT AS NEEDED.
FOR USE ON RUBBER: CLEAN THE SURFACE WITH ACETONE AND SPRAY AS A STANDALONE AND THEN HEAT SET. APPLY PAINT
FOR USE ON 11S AND FOAMS: CLEAN THE SHOE AND LIGHTLY SAND. USE A STANDALONE COAT ON THE PATENT LEATHER AND HEATSET. REPEAT AS NEEDED. YOU CAN USE BOTH METHODS. I RECOMMEND THE FIRST COAT BE A STANDALONE THOUGH.
A 4OZ BOTTLE GOES A LONG WAY. YOU CAN ALSO APPLY BY PAINT BRUSH AND HEAT SET. YOU DON’T HAVE TO AIRBRUSH.
ANY QUESTIONS DM @REMIXYAKICKZ ON IG. THANKS YALL!
Sponsored artist @Ashleescustoms uses this on her crocs and slides!